Three-layer wooden boards made of spruce glazed in anthracite grey RAL 7016. The edges and corners of the wooden boards were not milled and rounded as with normal table and benches sets, but produced with broken edges and corners. The corners were only rounded with a radius of 5 mm. The edges have a straight surface only at the top and at the bottom they have been broken by approx. 2 mm, thus creating a very modern design. The underside of the table top is stained brown. There are two stacking strips attached to tables and benches, which were also glazed in anthracite grey. The stacking strips are screwed from below, have a total height of 46 mm and prevent the racks from touching each other when stacked.
The galvanised and black matt powder-coated bench frames are particularly stable and tilt resistant due to a bracing to the rear. The table has extra narrow legs with a 50 cm wide foot, which are available in two versions.
Both versions are screwed to the iron plates from below and do not require any continuous screw connections, this has the advantage that no screw connections are required at the top of the table top.