Standing tables foldable with scissors frame, galvanized, stainless steel or powder coated up to 120cm table diameter
Standing tables, bistro tables, pub standing tables, foldable with wooden and polyethylene panels. Base frames made of galvanized steel and stainless steel in brewery quality
We offer you here a selection of individual bar tables and bistro tables for gastronomy and tent rental, in standing and sitting height to buy. If you want to buy absolutely stable, foldable and stable standing tables, then you are exactly right here. Basically, every wood and frame colour can be freely combined, all variants are foldable and intended for commercial use in gastronomy, tent rental, beer gardens etc.. If you want to buy privately this is of course also possible. Talk to us! Our colour palette contains all RAL - colours as well as each Lasurton.
Our high tables have the following advantages:
very space-saving and collapsible, with max. 6cm at the thickest point
can be equipped with different plates in almost all colours
all plastic or wooden panels used by us are absolutely break-proof both lengthwise and crosswise
long service life
high stability
no oscillation possible when touching or touching ( no coffee spillage )
Plugs are secured against falling out
available with umbrella hole and integrated umbrella holder
also transport racks are available
All our standing tables and bistro tables, with wooden or polyethylene tops are foldable, extremely stable and of high brewery quality.
Standing table with 80cm wooden plate
Standing table with three-layer wooden plate 80 cm No.02
Standing table 80 cm round with clear lacquered three layer wooden top is our most popular standing table. This model is folded only 6cm flat, has a clear lacquered, natural three-layer wooden plate, which is unbreakable due to the cross gluing.
The galvanized Stand table frames made of square tube have a very smooth surface, are extremely stable and do not vibrate.
Article number:No. 02
Table diameter:80 cm
Standing tables with light marbled polyethylene top
Standing table Polyethylene sheet light
This high table with 2 cm thick and 80 cm round polyethylene plate in white-black finely marbled has a galvanized square tube frame 30 mm X 30 mm. The basic colour of the table top is white. Due to these carefully selected materials, they are colloquially considered indestructible or indestructible.
With a weight of 22 kg, it is not exactly a lightweight, but a high weight also ensures vibration-free stability. If stability and weather resistance are required, then you will hardly find a better variant.
Article number:No.05
Table diameter:80 cm
Standing table with polyethylene plate coarse dark marbled
Standing table with polyethylene plate no.03
The standing table No.3 with polyethylene plate is available with a galvanized, powder-coated or stainless steel frame as well as a coarsely dark marbled polyethylene plate with a diameter of 80 cm. It is ideally suited for year-round outdoor use. This stand-up table is colloquially known as unbreakable or indestructible. There are also bistro tables with scissor frames at seat height with polyethylene tops in various
decors available. The steel construction consists of galvanised square tube 30 mm X 30 mm X 2.1 mm, is foldable and after folding the table is only 6 cm flat.
Article number:No.03
Table diameter:80 cm
Standing table absolutely weatherproof for gastronomy and tent rental
Standing table No.21 is foldable, absolutely break-proof and weatherproof. Due to these characteristics, this table with an installation height of 110 cm and a top diameter is particularly popular for commercial use in gastronomy and tent rental. Different versions of the frames are available, e.g. galvanised, black powder-coated, white powder-coated or completely made of stainless steel. In the standard version, the floor protectors consist of lamellae stoppers. Rounded or bevelled floor protectors are also available on request. The floor protectors are secured against falling out with screw connections.
Standing table with three-layer Douglas fir wood top
Zinc plated standing table with Doulasienholz No.06
Standing table no.6 with three-layer wooden plate made of Douglas fir 80cm round oiled three times. The frame is galvanized, but also available as a stainless steel frame. You can probably only buy tent furniture with these beautifully shiny wooden plates from us.
Since we also produce marquee furniture as individual pieces, different variants are also possible.
The wooden boards consist of three crosswise glued layers of 9 mm each, which makes a total thickness of 26.5 mm, because by sanding the surface approx. 0.5 mm of material is sanded off, a total thickness of 26.5 mm remains. The lamella width of the surface layers is 11.5 mm.
Article number:No.06
Table diameter:80 cm
Standing table with 100 cm wooden top
Standing table with 100cm wooden plate No.01
The standing table No.01 can be optionally equipped with a black powder-coated, white powder-coated, galvanized or stainless steel scissor frame. The natural wood plate has a diameter of 100cm and is varnished with three layers of clear varnish. The wood top can be lacquered with furniture lacquer or synthetic resin lacquer, depending on your wishes. Synthetic resin lacquer is also known as boat lacquer. Furniture varnish dries particularly fast, is very scratch-resistant and should not be exposed to the weather.
Boat varnish dries very slowly, is initially soft and elastic and can sometimes withstand a small shower of rain. After a complete curing time of approx. 90 days, the scratch resistance of the synthetic resin lacquer exceeds the scratch resistance.
Article number:No.01
Table diameter:100 cm
Standing table Douglas fir 100 cm galvanized foldable
Stand table 100cm with wooden plate made of Douglas fir No.70d
Meter standing table no.70d with galvanized scissors frame and a table top of 100cm diameter made of three-layer, oiled Douglas fir wood. The previous picture for no. 06 shows, with identical frames, the clear difference in size of the tops.
The Douglas fir wood is significantly more scratch-resistant than spruce wood and more weather-resistant by one durability class, formerly known as the resistance class. Due to the three-layer gluing, these panels belong to the plywood category and are unbreakable lengthwise and crosswise. The top layers consist of 100 % Douglas fir with mainly heartwood.
Article number:No.70d
Table diameter:100 cm
Standing table ebony colours frame galvanised
Folding standing table No.12
Standing table foldable, with a three-layer ebony coloured spruce wood plate with a diameter of 80cm.
The tabletop shown was treated twice with an open-pored thin-layer glaze in the colour ebony. The first treatment with ebony and the second treatment with clear oil glaze produces the colour ebony light. A three times treatment with ebony produces the colour ebony dark.
The folding scissor frame is galvanized and consists of square tube 30mm X 30mm X2mm. The floor protectors are secured against falling out by screwing.
Article number:No.12
Table diameter:80 cm
Zinc plated octagonal standing table with three-layer Douglas fir wood panel
This high table is octagonal with an oiled Douglas fir top. The wooden surface is breathable or open-pored. No water can penetrate and so-called red wine stains do not occur. This surface never flakes off, because it does not lie on top like lacquers and thick-film glazes. Due to the fact that water vapour can escape and the glaze is in the wood, peeling of the clear oil glaze is impossible.
The frames are galvanized with lamella plugs as floor protectors. The floor protectors are each secured against falling out with two screws. Two cross struts serve as foot support, the one welded on top also has lamella plugs. The table frame consists of square tube 30 mm X 30 mm.
Standing tables no.17 ( unbreakable ) with white powder-coated scissor frame and light marbled polyethylene top.
Anyone who has ever watched OCC ( Orange Country Chopper ) on television will have noticed that bikes look particularly classy when the parts are powder-coated and not chrome-plated or gold-plated. In addition, no blunt stainless steel is used.
Article number:No.05
Table diameter:80 cm
Standing table 80 cm wood colour mahogany
standing table 80 cm mahogany No.04
Standing table No.4 optionally with stainless steel scissor frame or galvanised steel frame and a three-layer, mahogany-coloured wooden top with a diameter of 80 cm.
The surface of the wooden plate has been treated twice with a thin layer glaze, is open-pored and never flakes off. If desired, the wooden surface can also be varnished with several layers of synthetic resin varnish (boat varnish).
Article number:No.04
Table diameter:80 cm
Standing table three-layer square
Standing table with square Wood top no.09
Standing table No.9 with square wooden top. Compared to a round table, a square table has a 40 percent larger table top with the same space requirement and from a production point of view the same amount of wood is required, because round table tops are always cut from square tops during production. This standing table is also available with a galvanised, powder-coated or stainless steel frame.
Article number:No.09
Table diameter:80 cm
Standing table rectangular Galvanised frame Standing table 80 cm Octagonal
Folding standing table, octagonal No.11
Standing table No.11 with an octagonal table top glazed in the colour oregon pine. The tabletop diameter can be ordered either with 80cm or 90cm (edge to edge). With a top cross section of e.g. 80cm (edge to edge) you have a much larger table surface compared to a round table top with almost the same space requirement.
Article number:No.11
Table diameter:80 cm
Standing table with 100cm three-ply wooden top in fir green
Standing table 100cm green glazed No.69
Standing table with round, three-layer and green glazed wooden top 100cm. The scissors frame is galvanized. Normally the shade of a glaze refers to the typical wood colour of the respective wood species, such as walnut is brown, mahogany is reddish, oregon pine is slightly orange. Fir wood can hardly be distinguished from spruce wood and is of course not green. The colour of the fir green wood varnish refers to the green needles of the silver fir. Some will ask themselves who buys folding furniture with this colour and where does it fit, for example at Raiffeisen.
By the table elevation No.225 man tables quickly convert to high tables change over. The table extensions fit naturally on our beer table frames and also on most frames of the beer tables of other manufacturers. By using these table extensions you get very stable, large and stable standing tables. Table widths from 50cm to 80cm and more are possible.
Standing tables no.02 and matching stools with galvanized scissors frame and a three-layer, clear lacquered natural wood top. The stools have a plate diameter of 40cm and are also available in various wood colours and polyethylene. The stools have a seat height of 79cm, with a plate diameter of at least 38cm. Due to the frame construction, the minimum size of the stool plates is 38 cm, but seats up to 50 cm can also be supplied. The stability and above all the space-saving storage possibility of the folding stools is incomparable.
Wooden standing table 80 cm ebony colours
foldable ebony-coloured wooden plate black powder-coated scissor frame
No.08
The standing table No.08 consists of a folding, black powder-coated scissor frame and a three-layer, ebony-coloured wooden plate with a diameter of 80cm. The colour pigments of the glaze in ebony are exclusively black. If the wood preservative glaze is applied twice to the surface, the colour ebony is created. If this is too dark, we can use a clear oil glaze for the second application and the colour ebony is light. If the customer would like the wood surface to be particularly dark, we can glaze it three times with the colour ebony, which results in the colour ebony dark.
Article number:No.08
Table diameter:80 cm
Standing table 120 cm
standing table 120 cm round
Standing table with round, three-layer wooden top. The frames of our standing tables can be equipped with three-layer wooden panels up to 120 cm in size. Of course, our high tables also have a stable stand with a panel size of 120cm and do not wobble. It doesn't matter whether you use a galvanized, powder-coated or a stainless-steel standing table frame with a scissor frame.
Standing table with round, three-layer wooden top. The frames of our standing tables can be equipped with three-layer wooden panels up to 120 cm in size. Of course, our high tables also have a stable stand with a panel size of 120cm and do not wobble. It doesn't matter whether you use a galvanized, powder-coated or a stainless steel standing table frame with a scissor frame.
Standing table with 80 cm mahogany colour
with three-layer wooden panel mahogany No.977
Stand tables with black powder-coated scissors frame and a three-layer, mahogany-coloured wooden top with a diameter of 80cm. The powder-coated bar table frames were first galvanized and then powder-coated, making it virtually impossible for rust bubbles to form under the powder coating. The wood surface consists of a thin layer glaze with red pigmentation. The colour pigments block UV light from the wood surface, thus preventing the wood from turning grey. Thin layer glazes penetrate into the wood during processing and are located in the wood, making it impossible for the surface to flake off.
Wood standing table 80 cm natural colour frame black powder coated.
Standing table folding with natural wood top clear lacquered Frame black powder coated No.22
Standing table with black powder-coated scissors frame and a three-layer, clear lacquered natural wood top with a diameter of 80 cm. This version is available up to a diameter of 120 cm. Due to the lacquered surface of the wooden board, we recommend avoiding its use outdoors. If the weather is fine and there is no rain, outdoor use is no problem, only rain will damage the table top. Other manufacturers weave with waterproof lacquer or waterproof thick layer glaze. Today's lacquers and thick-film glazes are always waterproof, but all lacquers and thick-film glazes flake off on all wood surfaces outside under the direct influence of rain. Our table tops are available on request, without surcharge, with thin layer glaze this never flakes off and is conditionally applicable in outdoor areas.
Standing table with umbrella holder and hole for umbrella
".
Standing table with umbrella holder
Standing table with umbrella holder and bore hole for umbrella. The standing tables with umbrella holder are just as foldable and space-saving as without umbrella holder, the umbrella holder does not have to be removed and does not impair the foldability. It is also possible to place an umbrella stand with a concrete base or a water-filled plastic base under this standing table, in which case the umbrella holder is not required.
The tabletop is 80cm round and has a 30mm parasol hole. The wooden surface of the three-layer spiked wood top was stained walnut and then painted over twice with two-component clear lacquer.
Up to 16 high tables fit into our transport rack. The transport rack has a lock at the top and bottom. Due to the two infinitely adjustable locks, the tables cannot slip or fall over. You can move from one unloading point to another, remove the desired amount of standing tables and clamp the remaining ones with the stepless locking device in one easy step.
Standing tables with scissors frame made of V2A steel. This stainless steel is absolutely rustproof. The example on the left shows a standing table with three-layer wooden top and V2A scissor frame made of square tube 25 X 25 X 2 mm. The example on the right in the picture shows a standing table with polyethylene plate and V2A scissor frame made of square tube 30 X 30 X 2 mm.
Rectangular standing table with stool
Standing table rectangular with stool
Our bar tables with scissor frames are also available with rectangular or square three-ply natural wood tops. With a 120 cm x 80 cm wooden top, they are still extremely stable.
Standing table with stool foldable
Standing table rectangular with stool
Standing tables with square, rectangular or three-layer table tops. The smallest side of the table tops should not be less than 70 cm and the largest should not exceed 120 cm. The high table shown has a table top of 120 cm x 80 cm. All intermediate sizes are available from us.
Standing table with navy blue polyethylene top
standing table with navy blue PE plate no.10
This high table variant was a special production of the fleet command of the German Armed Forces with navy blue polyethylene plate and umbrella stand. If you want to buy bar tables with such a special colour, you can expect delivery times of up to six weeks. Basically we offer all colours for purchase. All RAL colours are possible, but with plastic the RAL colour is not quite accurate because the material is dyed through and the plastic slightly falsifies the RAL colour. The RAL colour is not completely accurate because the material is coloured through, but again an advantage, because if the surface is damaged, the same colour appears again and again.
Article number:No.10
Table diameter:80 cm
Transport trolley for standing tables folded
No.21 Transport trolley for high tables
illustration Transport trolley folded. From 188 Euro per trolley and 147 Euro per rack. Prices ex stock Schlitz, plus VAT. Sale only in connection with our standing tables or to customers who have already bought standing tables from us.
Transport trolley for high tables 80 cm with anti-tilt device
Transport trolleys for high tables
Our transport trolleys and transport racks for standing tables have an adjustable anti-tipper. This prevents the tables from tipping back and forth during transport. The anti-tipper is fixed with a wing screw and can be infinitely adjusted.
PVC tablecloth for round tables
Tablecloth for high tables made of truck tarpaulin
Our PVC (truck tarpaulin) tablecloths for standing tables are glued and sewn exactly to the outer edge of the tabletop. The tablecloths are available in various colours. In our region, the colour of tablecloths is prescribed in some markets. These tablecloths for standing tables can also be printed. Thus the advertising can be changed to standing tables. Simply change the tablecloth and the advertising on the high table is already changed.
The tablecloths made from truck tarpaulin have the following advantages over normal tablecloths:
by high weight they are not blown away by the wind
exact accuracy of fit on the table top
do not need to be stapled to the bottom of the table top
absolutely waterproof
can be used as an advertising medium
Washable
Hygienic
Octagonal wooden board for bar table
Octagonal wooden board for bar table
Octagonal clear lacquered table top for bar tables and bistro tables. We have these table tops untreated with diameters of 80cm and 90cm in stock and can be coated with different colours or glazes according to customer requirements. All other sizes can be made at short notice. Round table tops up to 200cm diameter and angular table tops with a max. width of 200cm and a max. length of 260cm
Bistro table in seat height
Bistro table 100 cm round at seat height
Folding bistro table at seat height 74cm with three-layer ebony coloured wooden top and galvanised scissor frame. This table is available as standing and bistro table.