Our bench frames in real brewery quality are available in various colours and galvanized. Powder-coated fittings are always galvanized under the coating. The bench frames consist of angle steel 30 mm X 30 mm X 3 mm with a so-called gravel strip. At the top of the frame there is a flat steel 20 mm X 4 mm with two oblong holes for fixing the bench frame to the wooden plate. These bench racks are suitable for a bench width of 25 cm to 35 cm. From a bench width of 35 cm we recommend our bench frame no. 209. In the upper half a cross was welded in, by the cross the lateral load capacity of the bench frames is substantially increased, one can compare this with a cabinet, only if the rear wall is inserted, a cabinet stands correctly stable. In order to get the maximum stability, the welded cross in the middle was additionally reinforced with a welding spot.
Back to overview: Bench racks for standard benches without backrest